If you want to build a project where the machine can control the speed of the conveyer belt as well as the direction of movement, a rotary encoder is a must-have component. Keeping this in mind, is introducing the brand new orange 600 PPR 2-Phase Incremental Optical Rotary Encoder at a competitive price.
A rotary encoder is a type of position sensor which is used for determining the angular position of a rotating shaft. It generates an electrical signal, either analog or digital, according to the rotational movement.
Orange 600 PPR Incremental Optical Rotary Encoder is a hi-resolution optical encoder with quadrature outputs for increment counting. It will give 2400 transitions per rotation between outputs A and B. A quadrature decoder is required to convert the pulses to an up count. The Encoder is built to Industrial grade.
The Encoder comes with a Standard 1.5 m cable length which can be extended with extra cable if needed.
Consider Adding Pull up resistor to both A and B phases of the encoder output to avoid the effect of interference in output and get the precise logical output value from the encoder Also adding a pull-up resistor to all phase output lines protects the open collector output-triode from damage due to direct Vcc supply short circuit.
Note: A sample tutorial code has been given in the Description Section.
Power and Input Terminal Assignments:
| Terminal Name | Wire Color | Description |
| Phase A | White | Quadrature encoded output A |
| Phase B | Green | Quadrature encoded output B |
| VCC | Red | VCC should be connected to +ve of supply |
| GND | Black | The ground should be connected to negative the supply |
| Shield | Golden | The shield should be connected to GND |
Shielding is important. At a minimum, the cable should be protected either by a foil jacket with a drain wire or by a braided-wire shield that is grounded. For very sensitive applications or high-EMI environments, foil jacketed wires in combination with an overall braided-wire shield around the cable should be used to avoid interference and precise encoder output.
Features :
- High cost-efficient advantages.
- Incremental rotary encoder internal adopts ASIC devices
- High reliability, long life
- Anti-jamming performance
- Small size, lightweight, compact structure
- Easy installation
- Stainless steel shaft, High resolution, High quality, line interface with waterproof protection
| Model Type: | Rotary Encoder |
|---|---|
| Rated Speed (RPM): | 5000 |
| Pulse Per Revolution (PPR): | 600 |
| Operating Voltage (VDC): | 5 to 24 |
| Model No.: | 3806-OPTI-600-AB-OC |
| Encoder Type | Incremental |
| Current Consumption (mA): | ≤40 |
| Counts Per Revolution (CPR) | 2400 |
| Operating Temperature (°C) | -24 to 84 |
| Output Phase | AB |
| Protection Standard | IP52 |
| Shaft Type: | D Type, Solid |
| Shaft Length (mm): | 12 |
| Shaft Diameter (mm): | 6 |
| Mounting Hole (mm) | M3 |
| Weight (g): | 121 |
| Body Dimensions (D x L) mm | 40 x 38.40 |
| Cable Length (m): | 1.5 |
| Shipping Weight | 0.19 kg |
| Shipping Dimensions | 10 × 8 × 5 cm |
Based on 0 reviews
Be the first to review “Pro-Range 600 PPR 2-Phase Incremental Optical Rotary Encoder”
Related products
-
Encoder
Speed Measuring Sensor Groove Coupler Module For Arduino
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
SKU: 12838
There are no reviews yet.